Milwaukee 2757-20 M18 FUEL 1/4" Hex Impact Driver with ONE-KEY, Bare Tool

Sale price$ 179.00 Regular price$ 326.00


• (1) 2757-20 1/4" Hex Imapct Driver
• (1) Belt Clip
• (1) Bit Holder

• POWERSTATE Brushless Motor delivers 1800 in-lbs of fastening torque for faster driving speeds
• REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM Batteries deliver more work per charge and more work over the life of the battery
• ONE-KEY Enabled: Allows unlimited customization and control of output speed and power
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

• Fastening Torque: 0-1800 in-lbs
• RPM: 0-3,000 RPM
• IPM: 0-3,700
• Length: 5.25"
• DRIVE CONTROL: Customizable 4-Mode
• ONE-KEY Enabled

The M18 FUEL ¼" Hex Impact Driver features a POWERSTATE Brushless Motor that delivers 0-3,000 RPM and 0-1,800 in-lbs of fastening torque with constant power output under heavy load to drive screws faster. REDLINK PLUS Intelligence is the most advanced electronic system on the market,preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM Batteries deliver more work per charge and more work over the life of the pack than competitive(more...)

Customer Reviews

Based on 17 reviews
The ONE KEY feature is awesome

First off, I am a general contractor and use these tools daily. This is my second ONE KEY impact driver and the first one I bought is still running strong. I was skeptical about a Bluetooth feature on a drill, it just seemed gimmicky. Once I started playing with the features and settings, I was thoroughly impressed.
With this system you can configure mode 1-4 to whatever you want. For example, you can set 1 to low RPM for fastening small screws or screws made of softer metals that strip out easily, then you can set 2 up as � full throttle with a slow ramp up, and have 3 set to full speed and torque, with self tap setting as 4. This mode is what really impressed me. It has a setting specifically for self tapping screw, which makes metal roofing screws with neoprene washers come out very consistent and not bulge out the washer. You pull the trigger and it will ramp up to full speed until you pre drill through the metal. Once through, it will automatically cut to half speed to actually drive the screw in, and once you get to the head it drops to something like 5% speed to tighten the head down one clack at a time. All without adjusting your trigger pull!
As far as driving 3" deck screws this gun is a beast. You actually have to be careful with this gun as it's easy to over drive a fastener. I recently got a Makita impact driver as a promo from some composite decking I purchased and you can definitely tell the difference in power. It also has a shorter profile than the Makita, which is nice for tight spaces.
The ONE KEY app also let's you keep an inventory of all your tools as well as adjusting drill settings. And if you set it up, it will lock the tool if someone steals it and trys to use the ONE KEY feature that isn't on your approved list.
All in all, this drill is top tier, well worth the price tag.

I highly recommend this tool

The 1/4 hex driver performs flawlessly, every time I use it. Drives screws and lags effortlessly. Definitely a tool that I keep close by

Another great tool from Milwaukee

This is the fourth impact I purchased from Milwaukee and it is my go to driver. I have many others from other companies and they pretty much aren't used any more. The power and battery life of the milwaukee just seems to out perform the others.

I will continue to buy Milwaukee tools! Great prod

Have a work truck, I used this tool the very first day. How fast and easy this made my job! I only, and have always bought Milwaukee tools and they have never let me down!

as far as I consider

Best tools out there my favorite, I want to get one of everyone on the poster

You may also like

Recently viewed